Installation Instructions
An illustrated guide to measuring, marking, fixing and hanging your mirror.
View / Download PDFProduct Guides
Find installation steps and everyday controls for your Gloviea mirror. Open the illustrated PDFs on your phone, or save a copy for later.
Function Manual
A quick reference for lighting, brightness, motion sensing and anti-fog controls.
View / Download PDFOpens in a new tab. Use your browser’s Share or Download option to save the PDF.
These guides cover the illustrated models. Button positions and mounting hardware may vary. Match the icons on your mirror and follow the instructions supplied with your model.
Before you install
Check your mirror’s permitted mounting orientation and supplied mounting system before marking the wall. Use fixings suitable for your wall type. For hardwired connections, use a qualified electrician.
Mounting overview
Measure and level the mounting positions, mark the wall, drill the fixing holes, fit the appropriate anchors and screws, then hang the mirror securely as shown in the installation guide.
Lighting, colour and brightness
Tap the Power/Light button to turn the light on or off. With the light on, tap again within 3 seconds to cycle Warm White, Natural White and Cool White. Press and hold the Power/Light button to adjust brightness. The memory function recalls the previous brightness and colour setting.
Motion sensor
The radar icon is an indicator, not a touch button. When enabled, the sensor switches the light on when it detects movement. To change the sensor setting, turn the light off (standby), then hold the Power/Light button until the radar indicator flashes and release. See the function manual for the illustrated sequence.
Anti-fog
Tap the wavy-line button to turn anti-fog on; its indicator turns blue. Tap again to turn it off. The heated area helps reduce condensation. Use this function when needed.
Need help with your model? Contact Gloviea